Print hagaki cards
(Japan only)
Guidelines
Do not exceed the input tray capacity: 30 hagaki cards
Prepare to print
1.
Raise the output tray, and then remove all paper from the input tray.
2.
Slide the paper guide all the way to the left.
3.
Place the cards in the right side of the input tray. The side to be printed on should
face down and the short edge should point toward the printer.
4.
Push the cards into the printer until they stop.
5.
Slide the paper guide firmly against the edge of the cards.
6.
Lower the output tray.
HP Photosmart Software Help
35
1.
Open the
Printer Properties dialog box
.
2.
Click the
Features
tab, and then specify the following print settings:
–
Paper Type
: Click
More
, click
Hagaki
, and then select an appropriate hagaki
card type.
–
Print Quality
:
Normal
or
Best
–
Size
: An appropriate hagaki card size
3.
Select any other print settings that you want, and then click
OK
.
Use the
What's This? help
to learn about the features that appear in the Printer Properties
dialog box.
Note
If an out-of-paper message is displayed, see
Out-of-paper message
for
help in resolving the problem.