Installation instructions
To install a print cartridge
1.
Verify that the printer is turned on.
2.
Load Letter or A4 plain, white paper in the paper tray.
3.
Open the printer cover.
4.
Wait until the print cartridge cradle moves to the right side of the printer and is idle
and quiet.
HP Photosmart Software Help
59
5.
Press down on the print cartridge, and then slide it out of the print cartridge cradle.
6.
Remove the replacement print cartridge from its packaging and carefully remove the
plastic tape. Hold the print cartridge so that the copper strips are on the bottom and
facing toward the printer.
1 Remove plastic tape
Caution
Do not touch the print cartridge ink nozzles or copper contacts.
Touching these parts will result in clogs, ink failure, and bad electrical
connections. Do not remove the copper strips. They are required electrical
contacts.
Chapter 11
60
HP Deskjet D4100 series
7.
Slide the print cartridge at a slight upward angle into the cradle until the cartridge
snaps into place.
8.
Close the printer cover.
Align
the print cartridges for optimum print quality.
For information about storing print cartridges, see
Maintain print cartridges
.
For information about recycling empty print cartridges, see
HP inkjet supplies recycling
program
.
Warning
Keep both new and used print cartridges out of the reach of children.